How to switch to another Peppol access point?

Switching to another Peppol access point means that you must cancel your registration with the current provider and re-register with the new one. In principle, a company can only be active via one access point at a time for receiving invoices.

In any case, you can simply continue using Yoursminc, and you can create and send invoices to your customers and record all your expenses in the same way as you are used to.

The following step-by-step plan shows how you can do this:

1. Look up current registration

   1. If you are not sure where you are registered, you can look this up in the Peppol Directory .
      

2. Log out of the current access point

   1. This step is important; the active connection (e.g. with Billit, Banqup, Yuki, Unifiedpost, etc.) must be broken.

   2. Contact the relevant helpdesk if you are unable to do this immediately.

      Please note: It may take some time for the change to be registered within the Peppol directory.
      

3. Registering at a new access point

   1. After deregistering, as described above, you can register at a new access point.

   2. Navigate to your new provider's website and follow the steps for e-invoicing / Peppol

   3. Enter the requested information to re-register your KBO number (in Belgium) or KvK number (in the Netherlands).